Welcome to NZ Soda Blasting -The Multi Media Blasting Specialists - we have a range of media types at our disposal, depending on your individual requirements. These include More information relating to these media types will be coming shortly... Why Soda Blast? NZ Soda Blasting is proud to offer a vast number of inexpensive substitutions to degreasing, chemical cleaning, chemical coatings removal, restoration and protection. Our specially designed 100% food grade baking soda is delivered to a surface by means of LOW PRESSURE compressed air at high velocity. The soft, sharp granules of the baking soda are used to clean, degrease and remove paint or graffiti from many surfaces WITHOUT or very minimal to no damage to the surface including bearings and seals. Many other methods such as water blasting, sand blasting or chemical cleaning, are too abrasive to the surface and are not environmentally friendly. These methods can also be hazardous to the user. Soda Blast your item today! NZ Soda Blasting uses blasting media that is 100% food grade, biodegradable, non toxic, non hazardous, non sparking, non flammable, water soluble, odourless, eliminates odours, non irritant to the eyes and skin, non corrosive and mould resistant. |
|
|
Does Soda Blasting damage the surface? 
Soda blasting can be applied to numerous surfaces. These include glass, aluminium, stainless steel, wood, brick, steel, concrete and natural stone (sandstone, lime, marble) to name a few. Soda blasting causes very minimal or no damage to the surface. In certain cases we are able to do selective paint layer removal taking only top coats off while leaving the undercoat in tact. We are even able to remove paint from an aluminium soft drink can without damage to the can. Unlike sandblasting, garnet blasting or bead blasting, Soda blasting creates very minimal or NO heat which ensures the shape and strength of the surface being blasted. |
|
What Can Soda Blast Do?
- Soda Blasting can remove a single layer of paint if required
- Soda Blasting can remove bitumen from glass and metal
- Soda Blasting can remove baked on carbon and grease from food equipment
- Soda Blasting can restore engine frames, wings and parts from the aviation industry
- Soda Blast can remove paint and varnish from wood
- Soda Blast can remove concrete from glass and metal
- Soda Blast can remove grease and oil from engine and hydraulic parts
- Soda Blasting is great for crack detection on parts and structural joins
| REMOVE | CLEAN | | Oil Paint Grease Mould Graffiti Anti-Fouling Bitumen Baked on Carbon Varnish Glue
| Glass Boats Cars Aviation
Sandstone Brickwork Fire Damage Automotive Parts Catering Equipment Fiberglass
Wood Rubber
Aluminium | |
|
|
Can Soda Blasting Remove Bitumen? Until now, there has been no effective way to remove asphalt, tar or bitumen. Highly toxic chemicals including EB70 and kerosene together with high pressure water blasting was the only method known to date. NZ Soda Blasting now brings this unique and state of the art cleaning method to New Zealand. Soda blasting quickly and easily removes and cleans difficult substance including RUBBERISED TAR, SPRAY SEALERS, SURFACE TREATMENTS, EPOXY RESINS, RESURFACING CONCRETE and many more. There is no other method today that can remove such hard wearing
substances as quickly and efficiently as Soda Blasting. NZ Soda Blasting can clean and remove such substances from plant equipment, machinery, tools, sprayers and tanks to name but a few.
Furthermore these substances can be removed from delicate surfaces such as steel, stainless steel, concrete, rubber hoses and even glass with little or no damage to the surface.
Most EPA problems such as the use of highly toxic chemicals and waste run off are virtually eliminated as sodium bicarbonate being 100% natural is non toxic and environmentally friendly.
Clean up is also a breeze as NZ Soda Blasting has a range of both quick and easy containment techniques. The only factor lies with what is actually being cleaned off. In most cases, the product being cleaned can be vacuumed, swept up or in some cases may be contained with the aid of sand or other natural absorbent products which soaks up any wastes.
|
How Versatile is Soda Blasting? 
NZ Soda Blasting has a wide range of specialised services. From removing burnt on carbon from pots and pans to removing concrete from glass. From restoring engine and hydraulic parts, to crack detection on large ships and structures. From wood and antique furniture restoration, to council domestic graffiti, tar and asphalt removal. From glue and chewing gum removal, to main roads line marking removal. From paint removal on cars, to delicate aviation applications. The application are only limited to your
imagination. SODA BLASTING WILL NOT DAMAGE AUTO SHEETMETAL, GLASS, CHROME OR RUBBER PARTS |
|
|
| NZ Soda Blasting © 2009 all rights reserved. |
|
|
|
